You can optimise greenhouse lighting during high electricity prices by lighting when power is cheapest, dimming fixtures when daylight is strong, and tracking accumulated daily light so the crop still reaches its target. The right approach depends on your crop, season, daylight and installation.
Rising energy costs push many growers to cut lighting hours. That can backfire if the crop loses light it needs. The sections below explain which hours add the most value, how to shift load, whether dimming or switching off works better, how LED and HPS compare, and which controls can help you protect the crop while reducing energy costs.
Which lighting hours deliver the most value per kilowatt-hour?
The most valuable hours are those when supplemental light adds the most to crop growth at the lowest power price. This usually means periods with little or no daylight, when every added photon counts, combined with hours when electricity is cheaper.
Light is not equally valuable at every moment. On a bright afternoon, the crop may already receive enough light, and adding more gives diminishing returns. Early morning, late afternoon and dark winter days are different. In those periods, supplemental light fills a real gap.
Two measurements help you judge this. PPFD (Photosynthetic Photon Flux Density) is the amount of light the crop can use that reaches one square metre each second, measured in µmol/m²/s. It shows the light intensity at a given moment. DLI (Daily Light Integral) is the total of this light received over 24 hours, measured in mol/m²/day. It shows the accumulated total.
Your crop responds mainly to the daily total, but also to how that light is delivered. Target DLI values vary by crop, cultivar, growth stage and growing conditions. Tomatoes, cucumbers, strawberries, leafy greens and cut flowers all have different needs, so no single value applies everywhere.
When you compare options, it helps to look at the expected daylight for the day, the remaining gap between accumulated light and your DLI target, the hourly electricity price including any grid fees or peak tariffs, and the photoperiod your crop requires.
How can growers shift lighting away from peak-price hours?
You can shift lighting away from peak-price hours by moving part of your light schedule to cheaper periods, such as night or early morning, while keeping the total light and photoperiod within what your crop needs.
The aim is to redistribute lighting hours, not remove them. Many greenhouse markets show clear daily price patterns. If your contract or market exposes you to hourly prices, you can plan lighting around the cheaper windows.
Crop biology sets the limit. Many crops need a minimum dark period or respond to day length, so you cannot move light freely around the clock. Some crops tolerate longer lighting periods at lower intensity, while others may show stress or poor development under continuous light. Check what your specific crop and cultivar allow before changing the schedule.
Practical ways to shift load include:
- Start lighting earlier or extend it later, where the crop allows it.
- Reduce intensity during the highest-price hours and compensate during cheaper hours.
- Rely more on natural daylight and reduce supplemental light on bright days.
- Stagger switching across compartments to avoid sharp demand peaks.
Also consider the greenhouse climate. Moving lighting hours changes heat input, humidity and plant transpiration, so your climate strategy may need adjusting to match.
Does dimming LED fixtures save more than switching off?
Dimming and switching off save energy in different ways, and neither is always better. Dimming lowers power use while keeping some light on the crop. Switching off saves the most power in that hour but removes all supplemental light, which may leave a gap in your DLI.
Dimming means adjusting light intensity based on daylight, crop requirements, accumulated DLI or energy prices. This is different from dynamic spectrum control, which changes the colour composition of the light. The two are related but solve different problems. For price-based decisions, dimming is usually the more important tool.
Dimming works well when you want to keep the photoperiod and maintain a base level of light at lower cost. Switching off can make sense when daylight already supplies most of what the crop needs, or when prices are very high and the crop can safely carry a lighting gap.
Several points shape the result. Fixture efficiency at reduced output varies by luminaire and driver design. Crops differ in how sensitive they are to light interruptions, depending on species and growth stage. Not every control system supports every dimming function or step. Heat output also changes with dimming, which affects the greenhouse climate.
Exact savings depend on your installation and price pattern, so test the strategy in practice and check the outcome through measurement.
Is LED or HPS better when power prices spike?
Neither technology is automatically better. LED generally converts more electricity into light the crop can use and offers flexible dimming, which helps when prices spike. HPS gives off more radiant heat, which can offset heating costs, so the best choice depends on your greenhouse and energy mix.
When you compare LED and HPS, look beyond electricity consumption. Photon efficacy (how much usable light each unit of electricity produces), light distribution across the canopy, spectrum, heat distribution, maintenance and lifetime, and the balance between investment and running costs all matter.
Heat deserves special attention. HPS and LED affect the greenhouse environment differently, which changes air circulation, plant temperature, transpiration and humidity. A grower who relies on heat from HPS may need to adapt the heating and climate strategy after switching to LED.
Growers are still building experience with cultivation under LED compared with HPS, so crop response should be monitored closely during any transition. A site with cheap heat and limited power may reach a different conclusion than a site with expensive gas and flexible electricity contracts. Run the numbers for your own situation instead of assuming one answer fits all.
What control tools help automate price-based lighting decisions?
Tools that can help automate price-based decisions include dimmable drivers, light sensors, central control software, and connectivity that links luminaires to your climate computer. Together they can adjust intensity automatically based on daylight, accumulated DLI and electricity prices.
Manual adjustment becomes difficult once you manage several compartments and changing hourly prices. Automation lets the system react faster and more consistently than a person can.
A practical setup often combines light sensors that measure incoming radiation and canopy light, radiation forecasts that help plan the next hours or day, price information from your energy supplier or market data, and DLI targets set per crop, stage and compartment. Central software brings these inputs together and sends commands to the luminaires, using wireless or wired communication to reach large numbers of fixtures.
Check compatibility early. Not every control system supports every function, such as stepless dimming, group control or price signal integration. Confirm what your existing luminaires, drivers and climate computer can do before planning a strategy that depends on them.
How do growers avoid yield losses while cutting lighting costs?
Growers can reduce the risk of yield losses by cutting lighting costs without losing the light the crop needs. Track DLI, respect the required photoperiod, change the schedule gradually, and monitor crop response, so savings come from smarter timing and intensity rather than less light overall.
Start with your crop’s needs. Lighting requirements depend on crop, cultivar, growth stage, natural daylight, greenhouse conditions and production goals. A strategy that suits a leafy green may not suit a tomato crop in fruit set.
Follow these steps:
- Define the target. Set DLI and photoperiod goals per crop and stage with your cultivation team.
- Measure what you have. Record natural light and installed light output so you know the real baseline.
- Change one thing at a time. Adjust timing or intensity in a single compartment first and compare results.
- Watch the plant. Check growth, flowering, fruit set, quality and uniformity, not just energy figures.
- Review the climate. Confirm that temperature, humidity and transpiration stay in range after each change.
Savings are not guaranteed. Results depend on your lighting installation, control strategy, crop requirements, energy prices and greenhouse environment. A careful, measured approach can help you reduce energy costs while protecting the crop.
How Agrolux helps with lighting during high electricity prices
The right lighting strategy starts with the crop and depends on your location, daylight, greenhouse construction and height, cultivation stage, existing technology and energy prices. At Agrolux, we work with you to build a plan around those conditions rather than treating lighting as a simple product choice.
Our support can include greenhouse-specific lighting plans, light measurements and light distribution checks, and agronomic advice from our agronomists and plant scientists on how light and spectrum affect your crop. We offer LED and HPS lighting solutions matched to your situation, with honest guidance on the trade-offs. We can also help with dynamic lighting and energy management that adjusts intensity based on sunlight, energy prices and crop requirements. Our LYRA™ LED platform is modular, so you can modify or expand it as your needs change.
Our wireless connectivity can link large numbers of luminaires through a gateway for central, dynamic control. We are also developing AgroluxOS as our own operating system for greenhouse lighting, to be expanded over time.
If you want to review your lighting strategy for the year ahead, talk to our specialists at Agrolux about your greenhouse, crop and energy situation. You can also browse our portfolio to see how we approach different projects.
Gerelateerde artikelen
- What is the difference between light intensity and light duration?
- What should growers consider when upgrading an existing greenhouse lighting system?
- How does luminaire ageing affect light output and efficiency?
- How often should greenhouse growers measure light levels?
- Hoe kunnen kasbouwers het maximale uit hun belichtingsstrategie halen?