{"id":9208,"date":"2026-11-09T11:18:26","date_gmt":"2026-11-09T10:18:26","guid":{"rendered":"https:\/\/agrolux.com\/?p=9208"},"modified":"2026-11-16T14:50:18","modified_gmt":"2026-11-16T13:50:18","slug":"what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting","status":"publish","type":"knowledgebase","link":"https:\/\/agrolux.com\/nl\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/","title":{"rendered":"What Is PPFD and What Does It Tell You About Greenhouse Lighting?"},"content":{"rendered":"<p><strong>PPFD, or photosynthetic photon flux density, measures how many photons in the wavelength range usable by plants land on a surface each second.<\/strong> It tells you the actual light intensity your crop receives, expressed in micromoles of photons per square metre per second (\u00b5mol\/m\u00b2\/s). For greenhouse growers, PPFD is the most direct way to assess whether your lighting delivers sufficient intensity where plants actually need it.<\/p>\n<p>Unlike lux or wattage, PPFD focuses specifically on the wavelengths that drive photosynthesis, making it the standard measurement in professional horticultural lighting. The sections below explain how PPFD is measured, how it relates to PAR and DLI, what levels different crops may need, and how to use this data to make more informed lighting decisions.<\/p>\n<h2>How is PPFD measured in a greenhouse?<\/h2>\n<p>PPFD is measured using a quantum sensor, also called a PAR meter, placed at canopy level. The sensor counts photons arriving from all directions within the photosynthetically active radiation range (400 to 700 nm) and reports the result in \u00b5mol\/m\u00b2\/s. A single reading gives you the instantaneous light intensity at one point on the crop surface.<\/p>\n<p>A single measurement is rarely enough to understand your greenhouse. Growers typically take a grid of readings across the growing area, with points spaced evenly to capture variation between fixtures, near walls, and in the centre of the bay. This reveals whether your lighting delivers consistent intensity across the full crop surface or whether certain zones receive significantly more or less light than others.<\/p>\n<p>Record readings at the same height as the top of the crop canopy, since PPFD decreases with distance from the light source. Measurements taken too high or too low will not reflect what the plant actually experiences. For accurate results, take readings under stable conditions, avoid direct sunlight interference where possible, and note the fixture height and any shading structures that affect distribution.<\/p>\n<h2>What is the difference between PPFD, PAR, and DLI?<\/h2>\n<p>PAR, PPFD, and DLI describe three related but distinct aspects of plant-available light. <strong>PAR (photosynthetically active radiation)<\/strong> defines the wavelength range that plants use for photosynthesis: 400 to 700 nm. <strong>PPFD<\/strong> measures how many photons within that PAR range arrive at a surface per second. <strong>DLI (daily light integral)<\/strong> is the total amount of PAR photons a crop receives over a full 24-hour period, expressed in mol\/m\u00b2\/day.<\/p>\n<p>PAR is the category, PPFD is the instantaneous rate, and DLI is the cumulative daily dose. A PPFD reading of 200 \u00b5mol\/m\u00b2\/s tells you the light intensity at a given moment. Multiply that figure by the number of seconds the lights are on and divide by one million, and you get the contribution of that lighting period to the day&#8217;s DLI. DLI is particularly useful for planning because it accounts for both intensity and duration, giving you a single figure that reflects the total photosynthetic input your crop receives each day.<\/p>\n<p>For growers managing supplemental lighting alongside natural daylight, DLI is the practical planning tool. The PPFD from your fixtures combines with natural PPFD during daylight hours, and the accumulated total across the full day determines whether your crop reaches its target DLI. Adjusting supplemental lighting hours or intensity affects the DLI contribution from artificial light, but the agronomic outcome also depends on how much natural radiation the crop receives on any given day.<\/p>\n<h2>What PPFD levels do greenhouse crops actually need?<\/h2>\n<p>Target PPFD levels vary considerably by crop, cultivar, growth stage, and whether supplemental lighting is used alongside daylight or as the sole light source. The appropriate level for any given situation depends on the crop&#8217;s light saturation point, CO\u2082 availability, temperature, and the DLI target for that production system. The figures below are planning benchmarks used in professional greenhouse production, not fixed rules that apply universally.<\/p>\n<ul>\n<li><strong>Leafy greens and herbs:<\/strong> 150 to 300 \u00b5mol\/m\u00b2\/s under supplemental lighting, with DLI targets typically between 12 and 17 mol\/m\u00b2\/day, depending on crop and cultivar<\/li>\n<li><strong>Tomatoes and cucumbers:<\/strong> 400 to 700 \u00b5mol\/m\u00b2\/s at canopy level, with DLI targets often in the range of 20 to 30 mol\/m\u00b2\/day during active production, though this varies with season, location, and cultivation strategy<\/li>\n<li><strong>Cut flowers (e.g. roses, chrysanthemums):<\/strong> 200 to 400 \u00b5mol\/m\u00b2\/s depending on variety, season, and photoperiod requirements<\/li>\n<li><strong>Soft fruits (e.g. strawberries):<\/strong> 300 to 500 \u00b5mol\/m\u00b2\/s, with DLI targets around 15 to 22 mol\/m\u00b2\/day depending on production system and growth stage<\/li>\n<li><strong>Propagation:<\/strong> 100 to 200 \u00b5mol\/m\u00b2\/s, since young plants and cuttings are generally more sensitive to high light intensities<\/li>\n<\/ul>\n<p>Crops grown at elevated CO\u2082 concentrations may use higher PPFD more efficiently, since CO\u2082 availability influences how well a plant converts light into biomass. Actual targets should be developed in consultation with crop advisors and adjusted based on observed plant responses, local conditions, and the specific production calendar in use.<\/p>\n<h2>Why doesn&#8217;t a high lux or wattage rating tell you the same thing as PPFD?<\/h2>\n<p>Lux measures light intensity as perceived by the human eye, weighted toward the green and yellow wavelengths the eye is most sensitive to. Wattage measures electrical power consumption. Neither tells you how many photosynthetically useful photons reach your crop. PPFD directly quantifies plant-available light intensity at the canopy.<\/p>\n<p>A lamp with a high lux output may emit a spectrum dominated by green and yellow light, which looks bright to human observers but contributes relatively little to photosynthesis compared to red and blue wavelengths. Conversely, a deep-red LED fixture may appear dim to the human eye while delivering a higher PPFD because it emits heavily in wavelengths plants use more efficiently. Relying on lux to compare grow lights can lead to significant errors in lighting design.<\/p>\n<p>Wattage is equally misleading as a proxy for plant light delivery. Two fixtures with the same power draw can produce very different PPFD values depending on their efficacy (measured in \u00b5mol\/J) and the quality of their optical design. A fixture with higher efficacy converts more of its electrical input into photons in the PAR range, delivering more light to the crop per unit of energy consumed. When evaluating horticultural lighting, comparing fixtures using PPFD at a defined mounting distance and fixture efficacy in \u00b5mol\/J gives a more meaningful basis for assessment than raw wattage alone.<\/p>\n<h2>How does PPFD uniformity affect crop quality across a greenhouse?<\/h2>\n<p>PPFD uniformity describes how evenly light is distributed across the growing area. Poor uniformity means some plants receive significantly more light than others, which can lead to uneven growth rates, inconsistent crop quality, and variable harvest timing within the same bay. In commercial greenhouse production, uniformity is often as important as average intensity.<\/p>\n<p>Uniformity is typically expressed as a ratio of minimum to average PPFD across a measurement grid. A ratio of 0.7 or higher is generally considered acceptable in professional greenhouse lighting, though higher ratios may be preferable for crops where consistency is commercially important, such as cut flowers or propagation trays.<\/p>\n<p>Several factors affect PPFD uniformity in a greenhouse:<\/p>\n<ul>\n<li><strong>Fixture spacing and mounting height:<\/strong> Fixtures mounted too high or spaced too far apart can create hotspots directly below each unit and dimmer zones between them<\/li>\n<li><strong>Fixture optics:<\/strong> The beam angle and optical design of a luminaire determine how light spreads laterally across the canopy<\/li>\n<li><strong>Reflective surfaces:<\/strong> Greenhouse walls, gutters, and reflective films can redistribute light and improve uniformity near the edges of the growing area<\/li>\n<li><strong>Fixture overlap:<\/strong> Layouts where adjacent fixtures provide overlapping coverage tend to produce more uniform PPFD maps than layouts with gaps between coverage zones<\/li>\n<\/ul>\n<p>Modelling PPFD distribution before installation using photometric simulation software allows growers to identify potential uniformity issues and adjust fixture layout before committing to a fixed installation.<\/p>\n<h2>How do you use PPFD data to make better lighting decisions?<\/h2>\n<p>PPFD data gives you an objective basis for comparing your current light levels against crop targets, identifying zones that are over- or under-lit, and assessing whether your lighting strategy delivers the DLI your crop needs throughout the season.<\/p>\n<p>In practice, growers use PPFD data in several ways:<\/p>\n<ol>\n<li><strong>Baseline assessment:<\/strong> Map your current PPFD distribution at canopy level to understand what your existing fixtures actually deliver, rather than relying on manufacturer specifications alone<\/li>\n<li><strong>DLI planning:<\/strong> Combine your measured PPFD with local natural light data to estimate how many hours of supplemental lighting may be needed to reach your daily DLI target across different seasons<\/li>\n<li><strong>Fixture comparison:<\/strong> When evaluating new lighting, compare PPFD at a standardised mounting height and fixture efficacy (\u00b5mol\/J) to make like-for-like comparisons between technologies<\/li>\n<li><strong>Dimming and control:<\/strong> Use PPFD targets to inform dimming schedules that help maintain consistent DLI on brighter days, reducing the risk of over-illuminating the crop or consuming unnecessary energy. Note that dimming adjusts light intensity progressively, which is a different capability from dynamic spectrum control \u2014 the two should not be treated as interchangeable<\/li>\n<li><strong>Troubleshooting:<\/strong> If crop performance varies across a bay, a PPFD grid map can help confirm whether uneven light distribution is a contributing factor<\/li>\n<\/ol>\n<p>Lighting strategies that treat PPFD as an ongoing input rather than a one-time design parameter tend to remain better aligned with actual crop needs. As crops grow taller, seasons change, and fixtures age, the PPFD your crop receives shifts. Regular measurement helps you identify when adjustments may be warranted.<\/p>\n<h2>How Agrolux helps with PPFD and greenhouse lighting<\/h2>\n<p>We work with professional greenhouse growers to translate PPFD data into practical lighting strategies that match their crops, growing systems, and energy requirements. Our approach combines agronomic knowledge with professional lighting technology so that the numbers you measure at canopy level connect to decisions that can improve how your operation performs.<\/p>\n<ul>\n<li><strong>Lighting design and PPFD modelling:<\/strong> We use photometric simulation to map PPFD distribution before installation, helping you work toward target intensities and uniformity ratios across your greenhouse layout<\/li>\n<li><strong>Crop-specific lighting strategies:<\/strong> Whether you grow tomatoes, leafy greens, soft fruits, or cut flowers, we develop lighting plans built around the DLI and PPFD targets relevant to your crop, production calendar, and growing conditions<\/li>\n<li><strong>LED and HPS solutions:<\/strong> Our <a href=\"https:\/\/agrolux.com\/nl\/portfolio\/\">belichtingsportfolio<\/a> includes fixtures designed for high efficacy and optimised light distribution, so more of your energy input reaches the crop as usable photons<\/li>\n<li><strong>Intelligent control with AgroluxOS:<\/strong> Our control platform allows you to set dimming strategies based on PPFD targets and natural light conditions, helping you manage DLI more consistently across changing seasons<\/li>\n<li><strong>Ongoing support:<\/strong> We help you interpret measurement data, adjust your lighting strategy as your crop develops, and plan for future changes in your growing system<\/li>\n<\/ul>\n<p>If you would like to discuss your greenhouse, your crop targets, or how your current lighting compares to what your plants actually need, our specialists are ready to help. <a href=\"https:\/\/agrolux.com\/nl\/\">Visit Agrolux<\/a> to get in touch and start a conversation about your lighting strategy.<\/p>","protected":false},"excerpt":{"rendered":"<p>PPFD measures the plant-usable light your crop actually receives. Learn what your greenhouse lighting really delivers.<\/p>","protected":false},"author":9,"featured_media":9072,"template":"","categories":[],"tags":[],"class_list":["post-9208","knowledgebase","type-knowledgebase","status-publish","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\r\n<title>What Is PPFD and What Does It Tell You About Greenhouse Lighting? - Agrolux<\/title>\r\n<meta name=\"description\" content=\"PPFD is the key metric for greenhouse lighting decisions. Learn how it differs from lux and wattage, what levels your crops need, and how to use it to grow smarter.\" \/>\r\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\r\n<link rel=\"canonical\" href=\"https:\/\/agrolux.com\/nl\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/\" \/>\r\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\r\n<meta property=\"og:type\" content=\"article\" \/>\r\n<meta property=\"og:title\" content=\"What Is PPFD and What Does It Tell You About Greenhouse Lighting? - Agrolux\" \/>\r\n<meta property=\"og:description\" content=\"PPFD is the key metric for greenhouse lighting decisions. Learn how it differs from lux and wattage, what levels your crops need, and how to use it to grow smarter.\" \/>\r\n<meta property=\"og:url\" content=\"https:\/\/agrolux.com\/nl\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/\" \/>\r\n<meta property=\"og:site_name\" content=\"Agrolux\" \/>\r\n<meta property=\"article:modified_time\" content=\"2026-11-16T13:50:18+00:00\" \/>\r\n<meta property=\"og:image\" content=\"https:\/\/agrolux.com\/wp-content\/uploads\/2026\/09\/Naamloos-14.webp\" \/>\r\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\r\n\t<meta property=\"og:image:height\" content=\"1280\" \/>\r\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\r\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\r\n<meta name=\"twitter:label1\" content=\"Geschatte leestijd\" \/>\n\t<meta name=\"twitter:data1\" content=\"9 minuten\" \/>\r\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/\",\"url\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/\",\"name\":\"What Is PPFD and What Does It Tell You About Greenhouse Lighting? - Agrolux\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/agrolux.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/agrolux.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Naamloos-14.webp\",\"datePublished\":\"2026-11-09T10:18:26+00:00\",\"dateModified\":\"2026-11-16T13:50:18+00:00\",\"description\":\"PPFD is the key metric for greenhouse lighting decisions. Learn how it differs from lux and wattage, what levels your crops need, and how to use it to grow smarter.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/#breadcrumb\"},\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/#primaryimage\",\"url\":\"https:\\\/\\\/agrolux.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Naamloos-14.webp\",\"contentUrl\":\"https:\\\/\\\/agrolux.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/Naamloos-14.webp\",\"width\":1920,\"height\":1280},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Homepage\",\"item\":\"https:\\\/\\\/agrolux.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledgebase\",\"item\":\"https:\\\/\\\/agrolux.com\\\/knowledgebase\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"What Is PPFD and What Does It Tell You About Greenhouse Lighting?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/agrolux.com\\\/#website\",\"url\":\"https:\\\/\\\/agrolux.com\\\/\",\"name\":\"Agrolux\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/agrolux.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"}]}<\/script>\r\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"What Is PPFD and What Does It Tell You About Greenhouse Lighting? - Agrolux","description":"PPFD is the key metric for greenhouse lighting decisions. Learn how it differs from lux and wattage, what levels your crops need, and how to use it to grow smarter.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/agrolux.com\/nl\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/","og_locale":"nl_NL","og_type":"article","og_title":"What Is PPFD and What Does It Tell You About Greenhouse Lighting? - Agrolux","og_description":"PPFD is the key metric for greenhouse lighting decisions. Learn how it differs from lux and wattage, what levels your crops need, and how to use it to grow smarter.","og_url":"https:\/\/agrolux.com\/nl\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/","og_site_name":"Agrolux","article_modified_time":"2026-11-16T13:50:18+00:00","og_image":[{"width":1920,"height":1280,"url":"https:\/\/agrolux.com\/wp-content\/uploads\/2026\/09\/Naamloos-14.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Geschatte leestijd":"9 minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/","url":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/","name":"What Is PPFD and What Does It Tell You About Greenhouse Lighting? - Agrolux","isPartOf":{"@id":"https:\/\/agrolux.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/#primaryimage"},"image":{"@id":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/#primaryimage"},"thumbnailUrl":"https:\/\/agrolux.com\/wp-content\/uploads\/2026\/09\/Naamloos-14.webp","datePublished":"2026-11-09T10:18:26+00:00","dateModified":"2026-11-16T13:50:18+00:00","description":"PPFD is the key metric for greenhouse lighting decisions. Learn how it differs from lux and wattage, what levels your crops need, and how to use it to grow smarter.","breadcrumb":{"@id":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/#breadcrumb"},"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/#primaryimage","url":"https:\/\/agrolux.com\/wp-content\/uploads\/2026\/09\/Naamloos-14.webp","contentUrl":"https:\/\/agrolux.com\/wp-content\/uploads\/2026\/09\/Naamloos-14.webp","width":1920,"height":1280},{"@type":"BreadcrumbList","@id":"https:\/\/agrolux.com\/knowledgebase\/what-is-ppfd-and-what-does-it-tell-you-about-greenhouse-lighting\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Homepage","item":"https:\/\/agrolux.com\/"},{"@type":"ListItem","position":2,"name":"Knowledgebase","item":"https:\/\/agrolux.com\/knowledgebase\/"},{"@type":"ListItem","position":3,"name":"What Is PPFD and What Does It Tell You About Greenhouse Lighting?"}]},{"@type":"WebSite","@id":"https:\/\/agrolux.com\/#website","url":"https:\/\/agrolux.com\/","name":"Agrolux","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/agrolux.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"}]}},"_links":{"self":[{"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/knowledgebase\/9208","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/knowledgebase"}],"about":[{"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/types\/knowledgebase"}],"author":[{"embeddable":true,"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/users\/9"}],"version-history":[{"count":6,"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/knowledgebase\/9208\/revisions"}],"predecessor-version":[{"id":9930,"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/knowledgebase\/9208\/revisions\/9930"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/media\/9072"}],"wp:attachment":[{"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/media?parent=9208"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/categories?post=9208"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/agrolux.com\/nl\/wp-json\/wp\/v2\/tags?post=9208"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}